   |
|
POE60D-560
52W DC-DC Power Over Ethernet Splitter
Beschreibung
Phihong’s POE60D-560 Power over Ethernet splitter takes the combined input data and injected power from an Ultra Power 4-pair powering injector and splits it back out to a separate RJ45 data outlet and an output DC jack at the same voltage as the injected input. This splitter does not have an isolated output, has a 12.5 KΩ handshake resistor and is not compatible with IEEE802.3af or IEEE802.3at PSE injectors.
The splitter does not contain an internal DC to DC converter and can be used in application in which the user equipment already contains an internal DC to DC converter.
Eigenschaften
Applications
| Wimax Access Point; Blue Tooth Access Point | Last Mile Wireless; Computer workstations |
| Wireless Network Access Points | Mulit Radio Access Point |
Features
| DC Good LED; Non-Vented Case | Disconnect and Overload Protection per IEEE802.3af |
| Proprietary Detection | Gigabit compatible; 10/100/1000 Base T data rates |
Output
| DC Output Voltage | 50V - 57V (follows the input voltage) 52V min when used with POE60U-560G |
| Output Current | 1,1A |
| Regulation | non regulated |
Safety
| Isolation | The splitter output is isolated from the incoming POE voltage |
Input
| AC Input Voltage Range | 50 to 57 VDC |
| Receives power from either data or spare pairs | |
| AC Input Current | 1,4A (RMS) max. |
General
| Efficiency | 98% (typical) at max. load, 53V input |
| O/P Voltage Protection | In case of output over-voltage, crowbar will be short |
| Cable | Designed to operate up to 100meters per IEEE802.3 |
| CAT5e or CAT6 |
EMC
| Conducted & radiated Emission | EN55022 Class A | FCC Part15 Class A | ||||||||
| Immunity EN50082-1 |
| |||||||||
Environmental
| Temperature |
| Operation 0 to +40°C Non-operation -20 to +65°C |
| Humidity |
| Operation 5 to 90% |