Deutsch
English

POE21-120H

10W DC-DC Power Over Ethernet Splitter

Beschreibung

Phihong’s POE21-120 Power over Ethernet splitter takes the combined input data and injected power and splits it back out to a separate RJ45 data outlet and an output DC jack at 12V DC. The splitter contains an internal DC to DC converter and will take the place of an external mains adapter. This model has an isolated output, is functionally compliant to IEEE802.3af standards and works from either, data pair or spare pair powering. It is for use with Cat5e/Cat6 input cables into 10/100/1000 Base T systems. A LED indicator signals the functional status of the device.

Eigenschaften

Applications

IP Cameras Heaters and Illuminators Access Controls

Features

DC Good LED End device must be IEEE802.3af compatible
Non-Vented Case DC Power and PoE/Data Output
Power IEEE802.3af Camera Requires Phihong PoE Plus for full functionality
Gigabit Compatible 10W PoE output and 12W DC output at 12VDC
Connection and DC disconnection per device attached to Data Out

Output

Output Power POE: 10W / DC: 12W at 12V DC
PoE Load Min: 175mA at 57V DC / Max: 225mA at 44V DC
DC Load Min: 0.0A / Max: 1A
Regulation Line and Load ±2%

Safety

Insulation Resistance Primary to Secondary: >10M Ohm 500V DC
Dielectric withstand (HI-POT) Test Primary to secondary: 2121VDC for 1 minute, 10mA

Input

Unit receives power from Phihong PoE Plus Midspans only using Cat5e or Cat6 wiring up to 100 meters per IEEE802.3.
DC Input Current 0.7A (DC) and 45VDC at maximum load
DC Input Voltage Rating 45 – 57VDC for 12V

General

Efficiency 75% (typical) at max. load, 48V input
O/P Voltage Protection In case of output over voltage overload, crowbar will short. The output can be shorted permanently without damage.
Ripple 120mV maximum at 25°C
Input and Output Data Connector RJ45
Output Connector POE and data RJ45 Jack
Indicators GREEN LED – Output power “ON”
DC Output Center Positive Barrel 12x2,1x5,5mm
Tip is userchangeable for other sizes

EMC

Conducted & radiated Emission EN55022 Class A
FCC Part 15, Class A
Conducted & radiated Emission ESD EN61000-4-2. Level 3
RS EN61000-4-3. Level 2
Note: RS and ESD tested with POE36U-1AT

Environmental

Temperature
Operation 0 to +40°C Non-operation -20 to +65°C
Humidity
Operation 5 to 90%

Fragen zum Produkt?






Alle mit einem (*) versehenen Felder sind Pflichtangaben.