   |
|
POE14-137
14W DC-DC Power Over Ethernet Splitter
Beschreibung
Phihong’s POE 14-series 120 Power over Ethernet splitter takes the combined input data and injected power and splits it back out to a separate RJ45 data outlet and an output DC jack at voltages of 3.3V, 5V or 12V DC. The splitter contains an internal DC to DC converter and will take the place of an external mains adapter and allows a non-PoE-end-user device to be able to be powered by a PoE Injector.
These series have isolated outputs and are fully compliant to IEEE802.3af standards for use with Cat5/Cat5e/Cat6 input cables into 10/100/1000 Base T systems. A LED indicator signals the functional status of the device.
Eigenschaften
Applications
| IP Telephones | Blue Tooth Access Point |
| Wireless network Access Points | Security Cameras, IP Print Servers |
Features
| Fully Compliant with IEEE802.3af DC Power Supply | Full Protection OCP, OVP |
| Gigabit Compatible; DC Good LED | 10/100/1000MB Base-T Data Rates |
Output
| Output Voltage | 13,7V |
| Output Power | 13,7W at 36-57V DC |
| Output Current | 1A |
| Regulation | Line and Load ±5% |
Safety
| Isolation | The splitter output is isolated from the incoming PoE Voltage |
| Dielectric withstand (HI-POT) Test | By Zener Clamping |
| 1500VAC for 1 minute, 10mA |
Input
| Input Voltage Range | 36 to 56V DC |
| Receives power from either data or spare pairs | |
| DC Input Current | 0.6A; 36V DC at max. load |
General
| Efficiency | 72% (typical) at max. load |
| Output can be shorted permanently without damage |
EMC
| Conducted & radiated Emission | EN55022 Class A | tested with POE30U | ||||||||||||||
| Immunity EN50082-1 |
| |||||||||||||||
Environmental
| Temperature |
| Operation 0 to +40°C Non-operation -20 to +65°C |
| Humidity |
| Operation 5 to 90% |