   |
|
POE75U-1UP
Single Port 75 W PoE Adapter
Beschreibung
Phihong’s POE75U-1UP-R is a 75W High Power Single-Port injector. The PoE adapter is suitable for powering both PoE- and non-PoE enabled devices via the spare wires of a Cat5/Cat5e cable in 10/100/1000 Base T systems.
Eigenschaften
Applications
| Satellite Receiver | LCD Display; Security Cameras |
| Wireless Network Access Points | Computer workstation; Kiosk |
Features
| Fully Compliant with IEEE802.3af | SNMP Management Option |
| Diagnostic LEDs; Gigabit Compatible | Full Protection OCP, OVP; Broken wire detect |
Output
| DC Output Voltage/ Total Output Power | +56V / 75W |
| Load | Min. 0A / Max. 0.69A |
| Regulation | Line / Load: 54-57VDC under all conditions |
Safety
| Isolation Test | Primary to Secondary | 4242 VDC for 1minute |
| Primary to F.G. | 2121 VDC for 1 minute | |
| Output to F.G. | 2121 VDC | |
| Insulation Resistance | Primary to secondary | >10M OHM 500 VDC |
| Primary to F.G. | >10M OHM 500 VDC |
Input
| AC Input Voltage Range | 90 to 264 VAC |
| Leakage Current | 0.25mA max @ 254 VAC 60 Hz |
| AC Input Frequency | 47-63 Hz |
| AC Inrush Current | 15A (RMS) mx for 115VAC/ 20A (RMS)max.for230 VAC |
| AC Input Current | 1,25A for 90VAC / 0,875A for 240VAC |
General
| Efficiency | 65% (typical) at max. load and 120VAC 60Hz |
| Hold-up Time | 16mS min. 120VAC and max. load |
| Transient O/P Voltage Protection | 60V max. |
| DC Offset | No data degradation with DC imbalance 18mA per min. |
EMC
| Conducted & radiated Emission | FCC Part 15 Class B | ||||||||||||||
| EN55022 Class B | |||||||||||||||
| Immunity EN50082-1 |
|
Environmental
| Temperature |
| Operation 0 to +40°C Non-operation -25 to +65°C |
| Humidity |
| Operation 5 to 90% |