   |
|
POE20D-1AF
19.6W PoE Adapter DC Input Single Port Injector
Beschreibung
Phihong’s POE20D-1AF-R is a 19.6W PoE DC Input Single Port Injector. The PoE adapter is suitable for powering both PoE- and non PoE enabled devices via the spare wires of a Cat5/ Cat5e cable in 10/100 Base T systems.
Eigenschaften
Applications
| IP Telephones / IP Print Servers; Security Camera | Blue Tooth Access Point; Wireless Network Access Points |
Features
| Detection and Classification per IEEE802.3af | UNH IOL Tested; Gigabit Compatible |
| Diagnostic LEDs; Lowest cost DC Input Power Injector | Full Protection OCP, OVP; Non-Vented CaseInjector |
Output
| DC Output Voltage/ Power | 56 V/ 19.6W at 56VDC |
| Load | Min. 0A / Max. 0.35A |
| Regulation | Line / Load: 54-57Vdc under all conditions |
| DC Offset | No data degradation with DC imbalance 18mA |
Safety
| Isolation Test | Primary to Secondary | 2121VDC for 1min.,10mA |
| Primary to F.G. | 2121VDC for 1min.,10mA | |
| Output to F.G. | 2121VDC for 1min.,10mA | |
| Insulation Resistance | Primary to secondary | >10M OHM 500 VDC |
| Primary to F.G. | >10M OHM 500 VDC |
Input
| AC Input Voltage Range | 18 to 72 VDC |
| DC Input Current | 1.5A for 18V DC and maximum load |
General
| Efficiency | 80% (typical) at max. load > 36 to 72VDC |
| 75% (typical) at max. load < 18 to 36VDC | |
| Transient O/P Voltage Protection | 60V max. at switch on and off |
| Ripple and Regulation | 100mV maximum at ambient 25°C |
EMC
| Conducted & radiated Emission | FCC Part 15 Class B | ||||||||||||||
| EN55022 Class B | |||||||||||||||
| Immunity EN50082-1 |
|
Environmental
| Temperature |
| Operation -20 to +50°C Non-operation -25 to +85°C |
| Humidity |
| Operation 5 to 90% |