|
|
|
Phihong’s multi output gigabit PoE midspan POE576U-8MP series are fully complaint to IEEE802.3at standards. Models with 8, 16 or 24ports are available. Each product can fully provide 75W per port over Cat5/Cat5e/Cat6 cables for 10/100/1000 Base T systems, eliminating the need for power management and prioritization. The midspans have Cisco legacy detection without the need of external dongles, as well as an optional NIC interface.
Each product is provided with a Phihong graphics user interface (GUI) for diagnostics or remote control via the USB port on the standard model.
Applications
| Wireless Access Points | Computer Workstations |
| Security Systems | IP Cameras |
Features
| Proprietary Detection, Disconnect & Overload Protection | Optional SNMP Management |
| Gigabit Compatible; 1U Rack Mountable | Full Protection OTP, OCP, OVP |
| Full Power of 576W-72W per Port | Ultra PoE at 72W per port |
Output
| POE576U-8UP | 8 Ports |
| Total Output Power | 75W per port / 576W total maximum |
| Ripple and Regulation | 250mV maximum |
Safety
| Isolation Test | Primary to Secondary | 4242VDC for 1 minute |
| Primary to F.G. | 2121VDC for 1 minute | |
| Secondary to F.G. | 2121VDC for 1 minute |
Input
| AC Input Voltage Range | 90 to 264 VAC |
| AC Input Frequency | 47-63Hz |
| AC Input Current | 9A (RMS) mx for 90 VAC / 4.5A (RMS)max. for230 VAC |
| Leakage Current | 3.5mA maximum @ 264VAC 60Hz |
| AC Inrush Current | 30A (RMS) max. for 115VAC/ 60A (RMS)max. for230 VAC |
| Input Connector | AC Input IEC320 C14 |
General
| Efficiency | 75% (typical) at max. load and 120VAC 60Hz |
| Hold-up Time | 16mS min. 120VAC and max. load |
| Transient O/P Voltage Protection | 60V max. at switch on and off at any AC line Phase |
| Turn-On Delay Time | 20sec max. at max. load, and 120VAC 60Hz, 60Hz |
| IEEE 802.3af/at Interoperability | If 25kohm is detected the unit operates in “IEEE802.3at mode” 33.6W 2 pair powering. 12.5k detection resistance required for full power UNH Interoperability report available upon request |
EMC
| Conducted & radiated Emission | EN55022 Class A, FCC Class A with UTP cabling | ||||||||||||||
| EN55022 Class B, FCC Class B with FTP cabling | |||||||||||||||
| Immunity EN50082-1 |
|
Environmental
| Temperature |
| Operation 0 to +40°C Non-operation -25 to +65°C |
| Humidity |
| Operation/ Non-operation 5 to 90% |