   |
|
POE125U-8, POE125U-8C, POE125U-8N
Multiport 15.4 W per Port Midspan PoE Injector
Beschreibung
Phihong’s POE125U-8 is a low cost 8-Port midspan injector. It is fully compliant to the IEEE802.3af standards. This midspan injector can fully provide 15.4W per port over Cat5/Cat5e/Cat6 cables into 10/100/1000 Base T systems, eliminating the need for power management and prioritization.
This midspan is available as an optional Cisco legacy detection, without the need of an external dongle. It is also available as an optional NIC interface, with a Phihong graphical user interface (GUI) for diagnostics or remote control.
Eigenschaften
Applications
| IP Telephones; Wireless Network Access Points | Blue Tooth Access Point; Security Cameras |
Features
| Fully Compliant with IEEE802.3af | Gigabit compatible; FullProtection OCP,OVP |
| Full Power of 125W (15.4W per port) | Rack mounting is possible with an optional kit |
| Cisco Legacy Detection (optional); low cost | SNMPV3 with TLS/ SSL optional |
Output
| POE125U-8-R | POE125U-8C-R | POE125U-8N-R | |
| DC Output Voltage | 15.4W per port | 15.4W per port | 15.4W per port |
| Cisco Legacy Support / SNMP Management | NO/ NO | YES/ NO | YES/ YES |
Safety
| Isolation Test | Primary to Secondary | 3000 VAC for 1min. 10maA |
| Primary to F.G. | 1500 VAC for 1 minute | |
| Output to F.G. | 1500 VAC | |
| Insulation Resistance | Primary to secondary | >10M OHM 500 VDC |
| Primary to F.G. | >10M OHM 500 VDC |
Input
| AC Input Voltage Range | 90 to 264 VAC |
| Leakage Current | <3.5 mA max @ 254 VAC 60 Hz |
| AC Input Frequency | 47-63 Hz |
| AC Inrush Current | 30A (RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC |
| AC Input Current | 2.2A for 90VAC / 1.3A for 240VAC |
General
| Efficiency | 75% (typical) at max. load and 120VAC 60Hz |
| Hold-up Time | 10mS min. 120VAC and max. load |
| Transient O/P Voltage Protection | 60V max. at switch on and off at any AC line phase |
| Mounting | Optional 19” Rack Mounting adapter to mount one POE125U or 2 side by side. Order P/N POE125U-ACCY01 |
EMC
| Immunity EN50082-1 |
|
Environmental
| Temperature |
| Operation 0 to +40°C Non-operation -25 to +65°C |
| Humidity |
| Operation 5 to 90% |