   |
|
POE16S-1AFG
1 Port PoE Gigabit Cable Extender
Beschreibung
Phihong’s POE 16S-1AFG cans double the effective PoE Range of their devices to 200meters. By using your standard Category 5 or better Ethernet cables the POE16S-1AFG takes its power from an IEEE802.3at PoE Plus device (33.6W).
The output power is then dropped to be IEEE802.3af compatible 19W.
Eigenschaften
Applications
| IP Cameras | Wireless Access Points |
| Access Controls |
Features
| IEEE802.3af Class 4 | Powered by IEEE802.3at with Layer 1 Classification |
| Gigabit Compatible | Boost Circuit to Compensate for Wire Drops |
| Extends Ethernet to 200meters |
Output
| Output Voltage | 56V |
| Output Power | 19W |
| Load | min. 10mA; max. 350mA |
Safety
| Isolation Test | Input to F.G. | 2121VDC for 1min. 10mA |
| Output to F.G. | 2121VDC for 1min. 10mA | |
| Insulation Resistance | Input and Output to F.G. | >10MOhm 500VDC |
Input
| DC Input Voltage Range | 45 to 57VDC |
| DC Input Current | 1.0A at 45VDC and max. load |
| 0.8A at 57VDC and max. load | |
| Receives power from Midspan or Switch with IEEE802.3at Layer 1 Classification Class 4 or better. Optional DC Power Adapter | |
General
| PoE Standard Compliance | Input: 25K Internal Signature Resistance |
| Output: Detects a 25K Signature Resistance | |
| Cable | Designed to operate up to100m per IEEE802.3 |
| Cat5e or Cat6 | |
| Input and Output Data Connector | RJ45 |
| Optional DC Input Connector | Center Positive Barrel 9mm x 2.5mm ID x 5.5mm OD |
EMC
| Conducted & radiated Emission | EN55022 Class A | FCC part15 Class A |
| Immunity | ESD | EN61000-4-2. Level 3 |
| RS | EN61000-4-3. Level 3 | |
| EFT/ Burst | EN61000-4-4. Level 2 | |
| Surge | EN61000-4-5. Level2 | |
| Note: RS and CS tested with POE36U-1AT | ||
Environmental
| Temperature |
| Operation 0 to +55°C Non-operation -20 to +71°C |
| Humidity |
| Operation 5 to 90% |